© 2025 FilterCY
Submit an application
Fill the form and we will contact you as soon as possible
By clicking the Submit button, you agree to our Data Privacy
Find the right water filtration system in 1 minute.
Answer a few quick questions and get personalized recommendations for the best water filtration system for your home — with a discount: a drinking water filter, water softener, or whole-house filtration system.
Nutouch Aqua Mat Direct-Flow 600 GPD Reverse Osmosis System
€
500
€
The Nutouch Aqua Mat Direct-Flow 600 is a compact under-sink reverse-osmosis system designed for cold municipal water. It filters water on demand through a dedicated faucet, without requiring a separate storage tank. The system combines particle and carbon filtration with a 600 GPD-rated RO membrane to reduce dissolved salts and improve the taste and odour of drinking water.
The supplied leaflet states a product-water flow of 1.5 L/min and dimensions of 404 × 150 × 347 mm. A booster pump supports the filtration process, while the front display indicates filter status. The manual also describes automatic flushing and replacement reminders. A dedicated faucet is included in the supplied equipment.
The unit requires a cold-water feed, drain connection, electrical supply and enough room for tubing and future filter changes. Its stated inlet-pressure range is 1–4 bar. Performance depends on incoming water quality, pressure and temperature. The supplied documents do not specify a remineralisation cartridge for the one-way faucet configuration.
The supplied leaflet states a product-water flow of 1.5 L/min and dimensions of 404 × 150 × 347 mm. A booster pump supports the filtration process, while the front display indicates filter status. The manual also describes automatic flushing and replacement reminders. A dedicated faucet is included in the supplied equipment.
The unit requires a cold-water feed, drain connection, electrical supply and enough room for tubing and future filter changes. Its stated inlet-pressure range is 1–4 bar. Performance depends on incoming water quality, pressure and temperature. The supplied documents do not specify a remineralisation cartridge for the one-way faucet configuration.
Have a questions? Message us!
Drinking Water at Home
Fresh Reverse-Osmosis Water Without a Storage Tank
The Aqua Mat Direct-Flow 600 is a compact under-sink reverse-osmosis system for treated municipal water. Its booster pump and 600 GPD-rated membrane produce drinking water on demand, while sediment and carbon filtration help improve taste and reduce unwanted substances.
01
Direct Flow
Water is filtered as you use it, without a separate storage tank. The stated product-water flow is 1.57 L/min under the manufacturer's test conditions.
02
Compact Under-Sink Unit
The cabinet measures 404 × 150 × 347 mm. A dedicated faucet is included in the supplied equipment.
03
Easy-to-Follow Status
The front display indicates filter status and provides replacement reminders. The manual also describes automatic flushing.
Technology
How Aqua Mat Direct-Flow 600 Works
The system treats cold municipal water in stages before delivering it through its dedicated faucet. Concentrate water is discharged to the drain.
1
Pre-Filtration
A PP and carbon stage reduces suspended particles and unwanted tastes and odours before water reaches the RO membrane.
2
Reverse Osmosis
A pump feeds the 600 GPD-rated membrane, which reduces dissolved salts and other substances. The leaflet states up to 95% reduction; actual results depend on feed water and operating conditions.
3
Final Taste Stage
The manual describes a coconut-carbon post-filter to improve the taste and odour of the water delivered through the faucet.
Cold-water supply → PP + carbon → RO membrane → final carbon → dedicated faucet
RO concentrate → drain
Technical Data
Technical Specifications
Specifications below apply to the 600 GPD Direct-Flow model described in the supplied leaflet and manual.
| Product type | Direct-flow under-sink reverse-osmosis system |
|---|---|
| Membrane rating | 600 GPD (nominal membrane capacity) |
| Stated product-water flow | 1.57 L/min (approximately 94 L/h) |
| Stated reduction | Up to 95% for salinity and impurities, according to the leaflet; results vary |
| Rated total purification | 2,000 L in the supplied documentation; not a guaranteed cartridge-replacement interval |
| Inlet pressure | 0.1–0.4 MPa (1–4 bar) |
| Feed-water temperature | 5–38 °C (leaflet) |
| Power supply | 100–240 V, 50/60 Hz |
| Rated power | 80 W |
| Dimensions | 404 × 150 × 347 mm |
| Water source | Cold municipal water, as specified in the manual |
| Included faucet | Yes, according to the leaflet and packing list |
Installation and maintenance
The unit needs a cold-water connection, drain, suitable power outlet and space for filter changes. The supplied installation guide specifies a non-return valve in the drain line only, with its arrow pointing toward the drain. The one-way faucet configuration keeps the unused weak-mineralisation outlet plugged.
The manual lists a 12-month reference interval for the combined pre/post-carbon cartridge and RO membrane. Actual replacement depends on water quality, use and the filter-status indication. Have the installation and first-use flushing completed by a qualified technician.
* The 600 GPD membrane rating and 1.57 L/min product-water flow are different specifications. Actual flow and rejection vary with temperature, pressure and feed-water quality. No mineralisation cartridge or storage tank is stated for this configuration.
Applications
Made for Everyday Drinking Water
The direct-flow design is intended for homes that want a dedicated supply of filtered water without an RO storage tank.
Drinking Water
Use the dedicated faucet for water filtered on demand. Confirm the suitability of the source water before installation.
Cooking and Hot Drinks
Use filtered water for everyday food preparation, tea and coffee where a more consistent input is useful.
Compact Kitchens
The slim cabinet frees up space compared with a system that needs a separate storage tank; check service clearances before ordering.
FAQ
Frequently Asked Questions
Does Aqua Mat Direct-Flow 600 need a storage tank?
No separate storage tank is specified. It filters water on demand through the dedicated faucet.
Does 600 GPD mean the faucet produces 600 gallons per day?
600 GPD is the membrane's nominal rating. The leaflet separately lists product-water flow at 1.57 L/min. Actual output depends on feed-water conditions.
Does it add minerals after reverse osmosis?
The supplied documents do not specify a mineralisation cartridge for this one-way faucet configuration. The installation guide says the weak-mineralisation port remains plugged.
Does the system include a faucet?
Yes. The leaflet and manual's packing list include a dedicated faucet; confirm the contents of the retail package before installation.
How often should the filters be replaced?
The manual gives 12 months as a reference for the combined pre/post-carbon cartridge and the RO membrane. Actual life varies with water quality and usage; follow the filter-status display and service advice.
Can it treat tank or well water?
The supplied manual specifies municipal water as the feed source. Other sources require a water assessment and appropriate pretreatment before suitability can be determined.
What does installation require?
A cold-water feed within the stated pressure range, a drain, power, a suitable faucet position and enough space to access the filters and tubing.
Have a question?
