MYTREX HIHO FINE BUBBLE +e transforms an everyday shower into a multi-stage skin and hair care experience. It combines ultra-fine nanobubbles, chlorine filtration and gentle microcurrent technology in one premium handheld shower head.
Instead of focusing only on water pressure, the system is designed to improve cleansing, reduce chlorine exposure and provide different shower modes for daily skin and hair care.
Millions of extremely small bubbles help reach into pores and support removal of oil, dirt, dead skin cells and other residues during showering.
The integrated replaceable water filter reduces up to 98.5% of chlorine, helping limit direct chlorine exposure of the skin and hair during everyday showering.
A dedicated Microcurrent Mode generates a gentle 500 µA microcurrent using the water flow, adding an additional beauty-care function to the shower.
HIHO FINE BUBBLE +e combines three different technologies. Each addresses a different part of the shower experience: cleansing, water quality and skin care.
MYTREX generates ultra-fine bubbles significantly smaller than typical skin pores. Their small size allows the water to interact closely with the surface of the skin and helps remove impurities during rinsing.
The integrated replaceable filter is designed to reduce up to 98.5% of chlorine in the shower water before it reaches your skin and hair.
Microcurrent Mode generates a gentle electrical current from the water flow. The shower head must be held in the hand while using this mode for the microcurrent function to operate as intended.
MYTREX reports an increase in skin moisture levels of up to 34% following use of the fine-bubble shower in its independent laboratory testing.
Manufacturer-reported result. Independently tested with n=8. Individual results may vary.Switch between three water-flow modes depending on whether you want gentle mist, microcurrent skin care or stronger conventional rinsing.
A fine mist designed for gentle contact with the skin and a soft, hydrating shower experience. Particularly useful when a less aggressive spray is preferred.
Combines water flow with a gentle 500 µA microcurrent for skin-focused shower care. The shower head must be held while this mode is being used.
A stronger direct shower stream for conventional rinsing and cleansing when greater water flow is preferred.
* Flow rates shown with the water filter installed and measured by MYTREX at 0.1 MPa water pressure.
Key specifications and operating characteristics of the MYTREX HIHO FINE BUBBLE +e shower head.
| Product type | Filtered nanobubble microcurrent shower head |
| Nanobubble size | Approx. 0.000046 mm |
| Microcurrent output | 500 µA |
| Chlorine reduction | Up to 98.5% |
| Shower modes | Mist Bubble / Microcurrent / Straight Shower |
| Mist Mode flow with filter | 4.0 L/min |
| Microcurrent Mode flow with filter | 4.7 L/min |
| Straight Mode flow with filter | 8.3 L/min |
| Mist Mode flow without filter | 4.1 L/min |
| Microcurrent Mode flow without filter | 4.8 L/min |
| Straight Mode flow without filter | 8.7 L/min |
| Flow-rate test pressure | 0.1 MPa |
| Dimensions | 3.54 × 9.21 × 4.33 in |
| Weight | 0.62 lb |
| Water filter | Included |
| Adapters | 3 included |
| Warranty | 1 year |
HIHO FINE BUBBLE +e is designed to connect to compatible handheld shower hoses. Three adapters are supplied with the product to support different connection configurations.
Microcurrent Mode requires the user to hold the shower head while showering for the microcurrent function to work as intended.
Key questions about nanobubbles, chlorine filtration, microcurrent technology and everyday use of HIHO FINE BUBBLE +e.
It combines three technologies in one shower head: ultra-fine nanobubbles for cleansing, an integrated water filter for chlorine reduction and a 500 µA Microcurrent Mode for additional skin-focused shower care.
The manufacturer specifies chlorine reduction of up to 98.5% using the integrated replaceable water filter.
Nanobubbles are extremely small bubbles suspended in the water. MYTREX specifies a bubble size of approximately 0.000046 mm for HIHO FINE BUBBLE +e and uses them as part of the shower head's cleansing technology.
Microcurrent Mode generates a gentle current of approximately 500 µA using the water flow. MYTREX positions the technology as an additional beauty-care function designed for use during showering.
Yes. MYTREX specifically instructs users to hold the shower head while Microcurrent Mode is operating so the function can work as intended.
MYTREX positions the product for users concerned about dry or sensitive-feeling skin. The Mist Bubble Mode provides a gentle spray, while the integrated filter reduces chlorine exposure. Individual skin responses can vary.
The primary water-related benefit for hair is the reduction of chlorine exposure together with the fine-bubble rinsing action. It does not soften hard water or remove dissolved calcium and magnesium responsible for water hardness.
No. The integrated filter is designed primarily for chlorine reduction. It is not an ion-exchange water softener and does not remove the calcium and magnesium responsible for water hardness.
HIHO FINE BUBBLE +e provides Mist Bubble Mode for a gentle fine spray, Microcurrent Mode with 500 µA microcurrent and Straight Shower Mode for a stronger conventional rinse.
The filter creates a small difference in flow. At the manufacturer's test pressure of 0.1 MPa, Straight Mode is rated at 8.3 L/min with the filter and 8.7 L/min without it. The difference is smaller in the Mist and Microcurrent modes.
It is designed for connection to compatible handheld shower hoses. Three adapters, a cover ring and a rubber packing ring are included to support installation.
